Compare
Seymour Duncan Full Shred (SH-10) vs Seymour Duncan Jazz Model (SH-2)
Seymour Duncan Full Shred (SH-10)
neck humbucker
90 match
high confidence
Seymour Duncan Jazz Model (SH-2)
neck humbucker
We found no spec differences between them worth calling out.
Specs side by side
differs marks specs where they part ways| Spec | Seymour Duncan Full Shred (SH-10) | Seymour Duncan Jazz Model (SH-2) |
|---|---|---|
| DC resistancediffers | 7.4k | 7.72k |
| Inductancediffers | not measured | 4.25 H (measured, 1 reading) |
| Magnet | Alnico 5 | Alnico 5 |
| Coil | Hum-cancelling | Hum-cancelling |
| Resonant peak | 8 kHz (Seymour Duncan's own test load) | 8 kHz (Seymour Duncan's own test load) |
| Bass (tone chart)differs | 4 / 10 | 5 / 10 |
| Mids (tone chart)differs | 4 / 10 | 3 / 10 |
| Treble (tone chart)differs | 8 / 10 | 9 / 10 |
| Slot | neck humbucker | neck humbucker |
| Traits | vintage output, tight lows | vintage output, bright, scooped mids |
How close on each spec
100 means identical on that spec. The score weighs these, and counts anything we couldn't compare as a typical difference. How scoring works
Output
94
DC resistance (no inductance for one of them)
Magnet
100
both Alnico 5
Coil
100
same coil type
Brightness
100
tone charts on the same scale
Mids
83
tone charts on the same scale
Bass
83
tone charts on the same scale
Videos
No videos for either pickup collected yet.
What players and reviewers say
On the Seymour Duncan Full Shred (SH-10)
“The Full Shred is a tad lower in output and gets close to the lead sound of a JB.”
Comparing with Seymour Duncan JB Model (SH-4)
“With less in the lows and mids and plenty in the highs, it's going to cut through.”